For people who work with stone，brick，large tiles or blocks，it goes without
saying that precision is crucial to the end result. But the efficiency of the
machine should never compromise the need for good ergonomics and a reasonable
workload. Put simply，the stone or tile you cut must fit perfectly, just as the
machine and the blade you use must fit your work situation perfectly.
Feature:
1, Powerful 3HP direct drive motor
2, Four-piece cutting surface
detaches from water tray for easy cleaning and access to the water pump.
3,
Cutting table extension for large material, left side and right side.
4,
Cutting head glides easily on sealed bearings.
5, Steel construction with
perfect finish to resist wear and corrosion.
6, Build-in handles for easy
transportation
7, Simple, durable legs can be quickly removed for easy
transportation.
8, Cutting head pivots to 45 degree.
9, Allow to make
plunge cuts and rip cuts and the sturdy aluminum support rail provides straight
cutting and long blade life.
10.An electric water pump inside for water recycle.
MODEL NO.: SJ23080
MOTOR POWER: 3HP
MOTOR INSULATION CLASS: IP 55
SAW BLADE DIAMETER: 300MM OR 350MM
SAW BLADE BORE DIAMETER:25.4MM
MAXIMUM CUTTING CAPACITY: LENGTH 800MM
THICKNESS 85MM
TABLE SIZE: 1050X580MM
CUTTING ANGLE: 0degree-45degree
COOLING FLUID FLUX:600LT/H
N.W./G.W.: 108/135KG
DIMENSIONS: 1270X750X765MM
QUANTITY PER 20’/40’CONTAINER: 39PCS/78PCS
ONE 350MM BLADE WOULD BE INCLUDED IN THE PACKAGE
MODEL NO.: SJ23100
MOTOR POWER: 3HP
MOTOR INSULATION CLASS: IP 55
SAW BLADE DIAMETER: 300MM OR 350MM
SAW BLADE BORE DIAMETER: 25.4MM
MAXIMUM CUTTING CAPACITY: LENGTH 1000MM
THICKNESS 85MM
TABLE SIZE: 1250X580MM
CUTTING ANGLE: 0degree - 45degree
COOLING FLUID FLUX: 600LT/H
N.W./G.W.: 120/150KG
DIMENSIONS: 1470X750X765MM
QUANTITY PER 20’/40’CONTAINER: 36PCS/72PCS
ONE 350MM BLADE WOULD BE INCLUDED IN THE PACKAGE
MODEL NO.: SJ23120
MOTOR POWER: 3HP
MOTOR INSULATION CLASS: IP 55
SAW BLADE DIAMETER: 300MM OR 350MM
SAW BLADE BORE DIAMETER: 25.4MM
MAXIMUM CUTTING CAPACITY: LENGTH 1200MM
HEIGHT 85MM
TABLE SIZE: 1450X580MM
CUTTING ANGLE: 0degree - 45degree
COOLING FLUID FLUX: 600LT/H
N.W./G.W.: 130/163KG
DIMENSIONS: 1670X750X765MM
QUANTITY PER 20’/40’CONTAINER: 30PCS/60PCS
ONE 350MM BLADE WOULD BE INCLUDED IN THE PACKAGE
marble cutting,stone cutting machines,bridge saw,granite cutting machine
tool,construction machinery,construction tool, construction equipment,masonry
saw,block saw,brick saw,cut off saws,water jet cutting machine,stone cutting
tool machinery ,portable stone saw
A ceramic-tile saw is necessary to make certain cuts in tile, granite,
marble and other stone products. Most ceramic tile saws have diamond blades.
These saws cut ceramic-tile very easily because the saw blade is cooled by
water. The cuts are dust-free, and very smooth.
A wet tile saw cuts tiles made of ceramic, leaving a clean, smooth edge. A
tile setter needs to trim tiles at the installation site to fit the edges of a
room or create inventive designs. A table-mounted, portable wet tile saw allows
her to cut tile as they are needed to exact specifications. The saw combines a
circular blade, similar to a wood table saw, with a water pump and hose to
constantly drench the cutting area with water to reduce friction and cool the
surface.Since tiles are so thick, brittle, and made of ceramic, a special saw
must be used. An ordinary circular saw for wood or metal would either break the
tile or get so hot that it would seize up and stop cutting. However, ceramic
tile is not cut well with sharp blades. The wet tile saw was invented to address
all these unique properties of ceramic. It doesn't overheat, uses a relatively
dull blade with no serrations, and can be transported to a job site and set up
on top of an existing table or sawhorses.
A wet tile saw grinds a channel through the tile. A blunt, wide,
nonserrated blade uses sharp sand crystals or diamond to cut, instead of
sharpened metal. The circular blade is fitted with a plastic hose that splashes
the blade and tile surface with a steady stream of cool water. This hose
connects to a submersible water pump that sits in a large container of water,
such as a 5-gallon plastic bucket. Whenever the saw's motor turns on, the pump
also provides a cooling jet. The excess water and ceramic dust falls into a
catch tub.
To cut a tile using a wet tile saw, measure the exact space in which the
tile will fit. Cuts are usually along a perimeter, in a corner, or around an
electrical outlet. Mark the line on the full-sized tile in grease pencil. Most
saws will accommodate tiles up to 12 inches (30 cm) in size, but oversized saws
can be rented for huge floor tiles. Wearing safety glasses, place the tile on
the moveable platform, and line up the mark with the edge of the saw. With the
motor running, slide the platform toward the blade with an even but gentle
pressure. Since you are grinding the tile apart, ensure that the water have
sufficient time to cool everything.
Saw are very useful tools when it comes to home renovation and improvement.
One of the most useful types of saws is for cutting tile, and there are several
techniques and methods for cutting tile into specific styles, designs and
shapes. Great care is required when using a saw, and trying new cuts. In this
free video clip series, watch an expert demonstrate tile saw safety, the proper
tile saw table setup, as well as a variety of cuts you will use when cutting
tile. Diamond cuts, round cuts, right angles and more
